HiRez Color Printing

Standard Cost

Specifications

Frames/Locations


  • $60 setup charge per logo per location.
  • $0.50 per print charge for images less than 25 sq. inches. (If printed on outside and inside, $1.00 per frame charge)
  • Images greater than 25 square inches incur a $0.75 per print charge.
  • Full Bleed images are not typically accepted. In the rare case this can be printed, it will incur a $0.75 per print charge.
  • White folder, matte finish.
  • 25 square inches printing area (e.g. 5x5 or 6 1/4 x 4)
  • Full color pallet printed with our high quality 7-color CMYK ink printing process.

 

  • HiRez is available on the outside cover, inside cover, back cover and top/bottom mat of limited products.
  • The most common location for HiRez printing is on the inside cover of our Folder Frames.

 


Timing

File Format

Proof


  • Depends on quantity of prints and number of jobs in queue.
  • For example, a 1,000 print job would take approximately 1 week to process.

 

  • EPS, AI, or PDF.
  • File formats like BMP and TIF may be possible as well, as long as it is a minimum of 300 dpi, and the size is at least as large as the print area.
  • Please note that simply resizing a low-resolution image is not acceptable.
  • Digital images and scans of the actual printed proof will be emailed for review.
  • Hard Copy samples for this process are not provided.

 

Logo Alteration Information


We generally prefer not to change any customer artwork files. However, upon request, we can do minimal alterations, layout adjustments, etc. for an additional fee of $50 per half hour of work. Please inquire about this service if necessary.

 

Start Shopping Now!

Leave A Comment

Please note, comments must be approved before they are published